Der phpMyAdmin-Konfigurationsspeicher ist nicht vollständig konfiguriert, einige erweiterte Funktionen wurden deaktiviert. Klicken Sie hier, um herauszufinden warum.

Lösung:

Öffnen der Datei main.php im PhpMyAdmin-Verzeichnis. Dort Zeile 298.

### /usr/local/etc/snmp/snmpd.conf ###

disk / 20 %
# disk /tmp 20 %

createUser snmpdInternalUser
rouser snmpdInternalUser noauth .1
iquerySecName snmpdInternalUser
agentSecName snmpdInternalUser

trapsink x.x.x.x public
#trap2sink x.x.x.x public

monitor -r 10 -o dskPath -o dskPercent -o dskErrorMsg “dskTable” dskErrorFlag 0 1

<group name=”klima” ifType=”ignore”>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.2.1.1.1.4428.1.1″ instance=”1″ alias=”LZeitKomp121″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.2.1.1.1.4428.1.2″ instance=”1″ alias=”LZeitKomp122″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.2.1.1.1.4428.1.3″ instance=”1″ alias=”LZeitKomp123″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.1.1.1.1.1.1192.1.1″ instance=”1″ alias=”Rtemp21″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.1.1.1.1.1.1192.1.2″ instance=”1″ alias=”Rtemp22″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.1.1.1.1.1.1192.1.3″ instance=”1″ alias=”Rtemp23″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.1.1.2.1.1.1194.1.1″ instance=”1″ alias=”Rfeu21″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.1.1.2.1.1.1194.1.2″ instance=”1″ alias=”Rfeu22″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.1.1.2.1.1.1194.1.3″ instance=”1″ alias=”Rfeu23″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.3.1.1164.1.1″ instance=”1″ alias=”GerLaufzeit21″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.3.1.1164.1.2″ instance=”1″ alias=”GerLaufzeit22″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.3.1.1164.1.3″ instance=”1″ alias=”GerLaufzeit23″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.1.1.1.1166.1.1″ instance=”1″ alias=”CoolLaufzeit21″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.1.1.1.1166.1.2″ instance=”1″ alias=”CoolLaufzeit22″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.1.1.1.1166.1.3″ instance=”1″ alias=”CoolLaufzeit23″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.1.1.1.1168.1.1″ instance=”1″ alias=”FeuLaufzeit21″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.1.1.1.1168.1.2″ instance=”1″ alias=”FeuLaufzeit22″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.1.1.1.1168.1.3″ instance=”1″ alias=”FeuLaufzeit23″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.2.1.1.1.4528.1.1″ instance=”1″ alias=”LZeitKomp221″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.2.1.1.1.4528.1.2″ instance=”1″ alias=”LZeitKomp222″ type=”Gauge32″/>
<mibObj oid=”.1.3.6.1.4.1.29462.10.2.1.1.4.4.2.1.1.1.4528.1.3″ instance=”1″ alias=”LZeitKomp223″ type=”Gauge32″/>
</group>

<systemDef name=”Stulz-WIB-8000″>
<sysoid>.1.3.6.1.4.1.29462.10</sysoid>
<collect>
<includeGroup>klima</includeGroup>
</collect>
</systemDef>

### snmp-graph.properties ###

reports= klima.Rtemp21, klima.Rtemp22, klima.Rtemp23, klima.Rfeu21, klima.Rfeu22, klima.Rfeu23, klima.GerLaufzeit21, klima.GerLaufzeit22, klima.GerLaufzeit23, klima.CoolLaufzeit21, klima.CoolLaufzeit22, klima.CoolLaufzeit23, klima.FeuLaufzeit21, klima.FeuLaufzeit22, klima.FeuLaufzeit23, klima.LZeitKomp121, klima.LZeitKomp122, klima.LZeitKomp123, klima.LZeitKomp221, klima.LZeitKomp222, klima.LZeitKomp223, \

report.klima.Rtemp21.name=Ruecklufttemperatur 2.1
report.klima.Rtemp21.columns=Rtemp21
report.klima.Rtemp21.type=nodeSnmp
report.klima.Rtemp21.command=–title=”Ruecklufttemperatur 2.1″ \
–vertical-label=”Grad” \
DEF:load={rrd1}:Rtemp21:AVERAGE \
DEF:minLoad={rrd1}:Rtemp21:MIN \
DEF:maxLoad={rrd1}:Rtemp21:MAX \
LINE2:load#ff0000:”Ruecklufttemperatur 2.1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.Rtemp22.name=Ruecklufttemperatur 2.2
report.klima.Rtemp22.columns=Rtemp22
report.klima.Rtemp22.type=nodeSnmp
report.klima.Rtemp22.command=–title=”Ruecklufttemperatur 2.2″ \
–vertical-label=”Grad” \
DEF:load={rrd1}:Rtemp22:AVERAGE \
DEF:minLoad={rrd1}:Rtemp22:MIN \
DEF:maxLoad={rrd1}:Rtemp22:MAX \
LINE2:load#ff0000:”Ruecklufttemperatur 2.2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.Rtemp23.name=Ruecklufttemperatur 2.3
report.klima.Rtemp23.columns=Rtemp23
report.klima.Rtemp23.type=nodeSnmp
report.klima.Rtemp23.command=–title=”Ruecklufttemperatur 2.3″ \
–vertical-label=”Grad” \
DEF:load={rrd1}:Rtemp23:AVERAGE \
DEF:minLoad={rrd1}:Rtemp23:MIN \
DEF:maxLoad={rrd1}:Rtemp23:MAX \
LINE2:load#ff0000:”Ruecklufttemperatur 2.3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.Rfeu21.name=Rueckluftfeuchte 2.1
report.klima.Rfeu21.columns=Rfeu21
report.klima.Rfeu21.type=nodeSnmp
report.klima.Rfeu21.command=–title=”Rueckluftfeuchte 2.1″ \
–vertical-label=”Prozent” \
DEF:load={rrd1}:Rfeu21:AVERAGE \
DEF:minLoad={rrd1}:Rfeu21:MIN \
DEF:maxLoad={rrd1}:Rfeu21:MAX \
LINE2:load#ff0000:”Ruecklufttfeuchte 2.1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.Rfeu22.name=Rueckluftfeuchte 2.2
report.klima.Rfeu22.columns=Rfeu22
report.klima.Rfeu22.type=nodeSnmp
report.klima.Rfeu22.command=–title=”Rueckluftfeuchte 2.2″ \
–vertical-label=”Prozent” \
DEF:load={rrd1}:Rfeu22:AVERAGE \
DEF:minLoad={rrd1}:Rfeu22:MIN \
DEF:maxLoad={rrd1}:Rfeu22:MAX \
LINE2:load#ff0000:”Ruecklufttfeuchte 2.2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.Rfeu23.name=Rueckluftfeuchte 2.3
report.klima.Rfeu23.columns=Rfeu23
report.klima.Rfeu23.type=nodeSnmp
report.klima.Rfeu23.command=–title=”Rueckluftfeuchte 2.3″ \
–vertical-label=”Prozent” \e
DEF:load={rrd1}:Rfeu23:AVERAGE \
DEF:minLoad={rrd1}:Rfeu23:MIN \e
DEF:maxLoad={rrd1}:Rfeu23:MAX \
LINE2:load#ff0000:”Ruecklufttfeuchte 2.3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.GerLaufzeit21.name=Laufzeit Geraet 2.1
report.klima.GerLaufzeit21.columns=GerLaufzeit21
report.klima.GerLaufzeit21.type=nodeSnmp
report.klima.GerLaufzeit21.command=–title=”Laufzeit Geraet 2.1″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:GerLaufzeit21:AVERAGE \
DEF:minLoad={rrd1}:GerLaufzeit21:MIN \
DEF:maxLoad={rrd1}:GerLaufzeit21:MAX \
LINE2:load#ff0000:”Laufzeit Geraet 2.1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.GerLaufzeit22.name=Laufzeit Geraet 2.2
report.klima.GerLaufzeit22.columns=GerLaufzeit22
report.klima.GerLaufzeit22.type=nodeSnmp
report.klima.GerLaufzeit22.command=–title=”Laufzeit Geraet 2.2″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:GerLaufzeit22:AVERAGE \
DEF:minLoad={rrd1}:GerLaufzeit22:MIN \
DEF:maxLoad={rrd1}:GerLaufzeit22:MAX \
LINE2:load#ff0000:”Laufzeit Geraet 2.2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.GerLaufzeit23.name=Laufzeit Geraet 2.3
report.klima.GerLaufzeit23.columns=GerLaufzeit23
report.klima.GerLaufzeit23.type=nodeSnmp
report.klima.GerLaufzeit23.command=–title=”Laufzeit Geraet 2.3″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:GerLaufzeit23:AVERAGE \
DEF:minLoad={rrd1}:GerLaufzeit23:MIN \
DEF:maxLoad={rrd1}:GerLaufzeit23:MAX \
LINE2:load#ff0000:”Laufzeit Geraet 2.3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.CoolLaufzeit21.name=Laufzeit Kuehlung 2.1
report.klima.CoolLaufzeit21.columns=CoolLaufzeit21
report.klima.CoolLaufzeit21.type=nodeSnmp
report.klima.CoolLaufzeit21.command=–title=”Laufzeit Kuehlung 2.1″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:CoolLaufzeit21:AVERAGE \
DEF:minLoad={rrd1}:CoolLaufzeit21:MIN \
DEF:maxLoad={rrd1}:CoolLaufzeit21:MAX \
LINE2:load#ff0000:”Laufzeit Kuehlung 2.1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.CoolLaufzeit22.name=Laufzeit Kuehlung 2.2
report.klima.CoolLaufzeit22.columns=CoolLaufzeit22
report.klima.CoolLaufzeit22.type=nodeSnmp
report.klima.CoolLaufzeit22.command=–title=”Laufzeit Kuehlung 2.2″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:CoolLaufzeit22:AVERAGE \
DEF:minLoad={rrd1}:CoolLaufzeit22:MIN \
DEF:maxLoad={rrd1}:CoolLaufzeit22:MAX \
LINE2:load#ff0000:”Laufzeit Kuehlung 2.2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.CoolLaufzeit23.name=Laufzeit Kuehlung 2.3
report.klima.CoolLaufzeit23.columns=CoolLaufzeit23
report.klima.CoolLaufzeit23.type=nodeSnmp
report.klima.CoolLaufzeit23.command=–title=”Laufzeit Kuehlung 2.3″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:CoolLaufzeit23:AVERAGE \
DEF:minLoad={rrd1}:CoolLaufzeit23:MIN \
DEF:maxLoad={rrd1}:CoolLaufzeit23:MAX \
LINE2:load#ff0000:”Laufzeit Kuehlung 2.3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.FeuLaufzeit21.name=Laufzeit Befeuchtung 2.1
report.klima.FeuLaufzeit21.columns=FeuLaufzeit21
report.klima.FeuLaufzeit21.type=nodeSnmp
report.klima.FeuLaufzeit21.command=–title=”Laufzeit Befeuchtung 2.1″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:FeuLaufzeit21:AVERAGE \
DEF:minLoad={rrd1}:FeuLaufzeit21:MIN \
DEF:maxLoad={rrd1}:FeuLaufzeit21:MAX \
LINE2:load#ff0000:”Laufzeit Befeuchtung 2.1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.FeuLaufzeit22.name=Laufzeit Befeuchtung 2.3
report.klima.FeuLaufzeit22.columns=FeuLaufzeit22
report.klima.FeuLaufzeit22.type=nodeSnmp
report.klima.FeuLaufzeit22.command=–title=”Laufzeit Befeuchtung 2.2″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:FeuLaufzeit22:AVERAGE \
DEF:minLoad={rrd1}:FeuLaufzeit22:MIN \
DEF:maxLoad={rrd1}:FeuLaufzeit22:MAX \
LINE2:load#ff0000:”Laufzeit Befeuchtung 2.2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.FeuLaufzeit23.name=Laufzeit Befeuchtung 2.3
report.klima.FeuLaufzeit23.columns=FeuLaufzeit23
report.klima.FeuLaufzeit23.type=nodeSnmp
report.klima.FeuLaufzeit23.command=–title=”Laufzeit Befeuchtung 2.3″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:FeuLaufzeit23:AVERAGE \
DEF:minLoad={rrd1}:FeuLaufzeit23:MIN \
DEF:maxLoad={rrd1}:FeuLaufzeit23:MAX \
LINE2:load#ff0000:”Laufzeit Befeuchtung 2.3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.LZeitKomp121.name=Laufzeit Kompressor 1 2.1
report.klima.LZeitKomp121.columns=LZeitKomp121
report.klima.LZeitKomp121.type=nodeSnmp
report.klima.LZeitKomp121.command=–title=”Laufzeit Kompressor 1 2.1″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:LZeitKomp121:AVERAGE \
DEF:minLoad={rrd1}:LZeitKomp121:MIN \
DEF:maxLoad={rrd1}:LZeitKomp121:MAX \
LINE2:load#ff0000:”Laufzeit Kompressor 1 2.1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.LZeitKomp122.name=Laufzeit Kompressor 1 2.2
report.klima.LZeitKomp122.columns=LZeitKomp122
report.klima.LZeitKomp122.type=nodeSnmp
report.klima.LZeitKomp122.command=–title=”Laufzeit Kompressor 1 2.2″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:LZeitKomp122:AVERAGE \
DEF:minLoad={rrd1}:LZeitKomp122:MIN \
DEF:maxLoad={rrd1}:LZeitKomp122:MAX \
LINE2:load#ff0000:”Laufzeit Kompressor 1 2.2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.LZeitKomp123.name=Laufzeit Kompressor 1 2.3
report.klima.LZeitKomp123.columns=LZeitKomp123
report.klima.LZeitKomp123.type=nodeSnmp
report.klima.LZeitKomp123.command=–title=”Laufzeit Kompressor 1 2.3″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:LZeitKomp123:AVERAGE \
DEF:minLoad={rrd1}:LZeitKomp123:MIN \
DEF:maxLoad={rrd1}:LZeitKomp123:MAX \
LINE2:load#ff0000:”Laufzeit Kompressor 1 2.3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.LZeitKomp221.name=Laufzeit Kompressor 2 2.1
report.klima.LZeitKomp221.columns=LZeitKomp221
report.klima.LZeitKomp221.type=nodeSnmp
report.klima.LZeitKomp221.command=–title=”Laufzeit Kompressor 2 2.1″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:LZeitKomp221:AVERAGE \
DEF:minLoad={rrd1}:LZeitKomp221:MIN \
DEF:maxLoad={rrd1}:LZeitKomp221:MAX \
LINE2:load#ff0000:”Laufzeit Kompressor 2 2.1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.LZeitKomp222.name=Laufzeit Kompressor 2 2.2
report.klima.LZeitKomp222.columns=LZeitKomp222
report.klima.LZeitKomp222.type=nodeSnmp
report.klima.LZeitKomp222.command=–title=”Laufzeit Kompressor 2 2.2″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:LZeitKomp222:AVERAGE \
DEF:minLoad={rrd1}:LZeitKomp222:MIN \
DEF:maxLoad={rrd1}:LZeitKomp222:MAX \
LINE2:load#ff0000:”Laufzeit Kompressor 2 2.2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.klima.LZeitKomp223.name=Laufzeit Kompressor 2 2.3
report.klima.LZeitKomp223.columns=LZeitKomp223
report.klima.LZeitKomp223.type=nodeSnmp
report.klima.LZeitKomp223.command=–title=”Laufzeit Kompressor 2 2.3″ \
–vertical-label=”Minuten” \
DEF:load={rrd1}:LZeitKomp223:AVERAGE \
DEF:minLoad={rrd1}:LZeitKomp223:MIN \
DEF:maxLoad={rrd1}:LZeitKomp223:MAX \
LINE2:load#ff0000:”Laufzeit Kompressor 2 2.3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

<group  name=”cisco-vpdn” ifType=”ignore”>
<mibObj oid=”.1.3.6.1.4.1.9.10.24.1.1.4.1.3″ instance=”2″ alias=”vpdnSessions” type=”gauge” />
<mibObj oid=”.1.3.6.1.4.1.9.10.24.1.1.4.1.2″ instance=”2″ alias=”vpdnTunnels” type=”gauge” />
</group>

<systemDef name=”Cisco Routers”>
<sysoidMask>.1.3.6.1.4.1.9.1.</sysoidMask>
<collect>
<includeGroup>cisco-memory</includeGroup>
<includeGroup>cisco-router</includeGroup>
<includeGroup>cisco-temperature</includeGroup>
<includeGroup>cisco-voltage</includeGroup>
<includeGroup>cisco-router-interface</includeGroup>
<includeGroup>cisco-vpdn</includeGroup>
</collect>
</systemDef>

### snmp-graph.properties ###

reports= cisco.vpdnsessions, cisco.vpdntunnels \

report.cisco.vpdnsessions.name=Cisco VPDN Sessions
report.cisco.vpdnsessions.columns=vpdnSessions
report.cisco.vpdnsessions.type=nodeSnmp
report.cisco.vpdnsessions.command=–title=”Cisco VPDN Sessions” \
DEF:val1={rrd1}:vpdnSessions:AVERAGE \
DEF:minVal1={rrd1}:vpdnSessions:MIN \
DEF:maxVal1={rrd1}:vpdnSessions:MAX \
LINE2:val1#0000ff:”Cisco VPDN Sessions” \
GPRINT:val1:AVERAGE:” Avg  \\: %8.2lf %s” \
GPRINT:val1:MIN:”Min  \\: %8.2lf %s” \
GPRINT:val1:MAX:”Max  \\: %8.2lf %s\\n”

report.cisco.vpdntunnels.name=Cisco VPDN Tunnels
report.cisco.vpdntunnels.columns=vpdnTunnels
report.cisco.vpdntunnels.type=nodeSnmp
report.cisco.vpdntunnels.command=–title=”Cisco VPDN Tunnels” \
DEF:val1={rrd1}:vpdnTunnels:AVERAGE \
DEF:minVal1={rrd1}:vpdnTunnels:MIN \
DEF:maxVal1={rrd1}:vpdnTunnels:MAX \
LINE2:val1#0000ff:”Cisco VPDN Tunnels” \
GPRINT:val1:AVERAGE:” Avg  \\: %8.2lf %s” \
GPRINT:val1:MIN:”Min  \\: %8.2lf %s” \
GPRINT:val1:MAX:”Max  \\: %8.2lf %s\\n”

<group  name=”cisco-vpdn” ifType=”ignore”>
<mibObj oid=”.1.3.6.1.4.1.9.10.24.1.1.4.1.3″ instance=”2″ alias=”vpdnSessions” type=”gauge” />
<mibObj oid=”.1.3.6.1.4.1.9.10.24.1.1.4.1.2″ instance=”2″ alias=”vpdnTunnels” type=”gauge” />
</group>

<systemDef name=”Liebert Chiller”>
<sysoidMask>.1.3.6.1.4.1.476.1.42.4.3.20</sysoidMask>
<collect>
<includeGroup>chiller</includeGroup>
</collect>
</systemDef>

<group name=”chiller” ifType=”ignore”>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.18.1″ instance=”0″ alias=”ChillGenAlarm” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.20.3″ instance=”0″ alias=”ChillTempSetac” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.24.5″ instance=”0″ alias=”ChillPTCInTemp” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.24.6″ instance=”0″ alias=”ChillPTCOuTemp” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.24.7″ instance=”0″ alias=”ChillPTCAmbTemp” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.24.8″ instance=”0″ alias=”ChillPTCEvaTem” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.26.4″ instance=”0″ alias=”ChillC1PresBar” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.26.5″ instance=”0″ alias=”ChillC2PresBar” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.31.1″ instance=”0″ alias=”ChillAnaConden1″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.31.3″ instance=”0″ alias=”ChillValve3P” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.32.4″ instance=”0″ alias=”ChillManComp1″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.32.6″ instance=”0″ alias=”ChillManComp2″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.33.9″ instance=”0″ alias=”ChillManComp3″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.33.10″ instance=”0″ alias=”ChillManComp4″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.11.3″ instance=”0″ alias=”ChillHourComp1″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.11.4.” instance=”0″ alias=”ChillHourComp2″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.11.5″ instance=”0″ alias=”ChillHourFC” type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.12.1″ instance=”0″ alias=”ChillHourComp3″ type=”integer”/>
<mibObj oid=”.1.3.6.1.4.1.476.1.42.4.3.20.1.1.12.2″ instance=”0″ alias=”ChillHourComp4″ type=”integer”/>
</group>

### snmp-graph.properties ###

reports=chiller.ChillGenAlarm, chiller.ChillTempSetac, chiller.ChillPTCInTemp, chiller.ChillPTCOuTemp, chiller.ChillPTCAmbTemp, chiller.ChillPTCEvaTem, chiller.ChillC1PresBar, chiller.ChillC2PresBar, chiller.ChillAnaConden1, chiller.ChillValve3P, chiller.ChillManComp1, chiller.ChillManComp2, chiller.ChillManComp3, chiller.ChillManComp4, chiller.ChillHourComp1, chiller.ChillHourComp2, chiller.ChillHourComp3, chiller.ChillHourComp4, chiller.ChillHourFC, \

report.chiller.ChillGenAlarm.name=General Alarm
report.chiller.ChillGenAlarm.columns=ChillGenAlarm
report.chiller.ChillGenAlarm.type=nodeSnmp
report.chiller.ChillGenAlarm.command=–title=”General Alarm” \
–vertical-label=”Anzahl Alarme” \
DEF:load={rrd1}:ChillGenAlarm:AVERAGE \
DEF:minLoad={rrd1}:ChillGenAlarm:MIN \
DEF:maxLoad={rrd1}:ChillGenAlarm:MAX \
LINE2:load#ff0000:”General Alarm” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillTempSetac.name=ChillTempSetac
report.chiller.ChillTempSetac.columns=ChillTempSetac
report.chiller.ChillTempSetac.type=nodeSnmp
report.chiller.ChillTempSetac.command=–title=”Actual Setpoint” \
–vertical-label=”in Grad” \
DEF:load={rrd1}:ChillTempSetac:AVERAGE \
DEF:minLoad={rrd1}:ChillTempSetac:MIN \
DEF:maxLoad={rrd1}:ChillTempSetac:MAX \
DEF:loadRaw={rrd1}:ChillTempSetac:AVERAGE \
CDEF:load=loadRaw,10,/ \
LINE2:load#ff0000:”ChillTempSetac” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillPTCInTemp.name=ChillPTCInTemp
report.chiller.ChillPTCInTemp.columns=ChillPTCInTemp
report.chiller.ChillPTCInTemp.type=nodeSnmp
report.chiller.ChillPTCInTemp.command=–title=”Eingangstemperatur Wasser” \
–vertical-label=”in Grad” \
DEF:load={rrd1}:ChillPTCInTemp:AVERAGE \
DEF:minLoad={rrd1}:ChillPTCInTemp:MIN \
DEF:maxLoad={rrd1}:ChillPTCInTemp:MAX \
DEF:loadRaw={rrd1}:ChillPTCInTemp:AVERAGE \
CDEF:load=loadRaw,10,/ \
LINE2:load#ff0000:”ChillPTCInTemp” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillPTCOuTemp.name=ChillPTCOuTemp
report.chiller.ChillPTCOuTemp.columns=ChillPTCOuTemp
report.chiller.ChillPTCOuTemp.type=nodeSnmp
report.chiller.ChillPTCOuTemp.command=–title=”Ausgangstemperatur Wasser” \
–vertical-label=”in Grad” \
DEF:load={rrd1}:ChillPTCOuTemp:AVERAGE \
DEF:minLoad={rrd1}:ChillPTCOuTemp:MIN \
DEF:maxLoad={rrd1}:ChillPTCOuTemp:MAX \
DEF:loadRaw={rrd1}:ChillPTCOuTemp:AVERAGE \
CDEF:load=loadRaw,10,/ \
LINE2:load#ff0000:”ChillPTCOuTemp” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillPTCAmbTemp.name=ChillPTCAmbTemp
report.chiller.ChillPTCAmbTemp.columns=ChillPTCAmbTemp
report.chiller.ChillPTCAmbTemp.type=nodeSnmp
report.chiller.ChillPTCAmbTemp.command=–title=”Aussentemperatur” \
–vertical-label=”in Grad” \
DEF:load={rrd1}:ChillPTCAmbTemp:AVERAGE \
DEF:minLoad={rrd1}:ChillPTCAmbTemp:MIN \
DEF:maxLoad={rrd1}:ChillPTCAmbTemp:MAX \
DEF:loadRaw={rrd1}:ChillPTCAmbTemp:AVERAGE \
CDEF:load=loadRaw,10,/ \
LINE2:load#ff0000:”ChillPTCAmbTemp” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillPTCEvaTem.name=ChillPTCEvaTem
report.chiller.ChillPTCEvaTem.columns=ChillPTCEvaTem
report.chiller.ChillPTCEvaTem.type=nodeSnmp
report.chiller.ChillPTCEvaTem.command=–title=”Temperatur am Verdampfereingang” \
–vertical-label=”ChillPTCEvaTem” \
DEF:load={rrd1}:ChillPTCEvaTem:AVERAGE \
DEF:minLoad={rrd1}:ChillPTCEvaTem:MIN \
DEF:maxLoad={rrd1}:ChillPTCEvaTem:MAX \
DEF:loadRaw={rrd1}:ChillPTCEvaTem:AVERAGE \
CDEF:load=loadRaw,10,/ \
LINE2:load#ff0000:”ChillPTCEvaTem” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillC1PresBar.name=ChillC1PresBar
report.chiller.ChillC1PresBar.columns=ChillC1PresBar
report.chiller.ChillC1PresBar.type=nodeSnmp
report.chiller.ChillC1PresBar.command=–title=”Druck Kreislauf 1″ \
–vertical-label=”ChillC1PresBar” \
DEF:load={rrd1}:ChillC1PresBar:AVERAGE \
DEF:minLoad={rrd1}:ChillC1PresBar:MIN \
DEF:maxLoad={rrd1}:ChillC1PresBar:MAX \
LINE2:load#ff0000:”ChillC1PresBar” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillC2PresBar.name=ChillC2PresBar
report.chiller.ChillC2PresBar.columns=ChillC2PresBar
report.chiller.ChillC2PresBar.type=nodeSnmp
report.chiller.ChillC2PresBar.command=–title=”Druck Kreislauf 2″ \
–vertical-label=”ChillC2PresBar” \
DEF:load={rrd1}:ChillC2PresBar:AVERAGE \
DEF:minLoad={rrd1}:ChillC2PresBar:MIN \
DEF:maxLoad={rrd1}:ChillC2PresBar:MAX \
LINE2:load#ff0000:”ChillC2PresBar” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillAnaConden1.name=ChillAnaConden1
report.chiller.ChillAnaConden1.columns=ChillAnaConden1
report.chiller.ChillAnaConden1.type=nodeSnmp
report.chiller.ChillAnaConden1.command=–title=”Kondensator Lueftergeschwindigkeit” \
–vertical-label=”ChillAnaConden1″ \
DEF:load={rrd1}:ChillAnaConden1:AVERAGE \
DEF:minLoad={rrd1}:ChillAnaConden1:MIN \
DEF:maxLoad={rrd1}:ChillAnaConden1:MAX \
LINE2:load#ff0000:”ChillAnaConden1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillValve3P.name=ChillValve3P
report.chiller.ChillValve3P.columns=ChillValve3P
report.chiller.ChillValve3P.type=nodeSnmp
report.chiller.ChillValve3P.command=–title=”Freecooling Ventil” \
–vertical-label=”ChillValve3P” \
DEF:load={rrd1}:ChillValve3P:AVERAGE \
DEF:minLoad={rrd1}:ChillValve3P:MIN \
DEF:maxLoad={rrd1}:ChillValve3P:MAX \
LINE2:load#ff0000:”ChillValve3P” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillManComp1.name=ChillManComp1
report.chiller.ChillManComp1.columns=ChillManComp1
report.chiller.ChillManComp1.type=nodeSnmp
report.chiller.ChillManComp1.command=–title=”Kompressor 1″ \
–vertical-label=”ChillManComp1″ \
DEF:load={rrd1}:ChillManComp1:AVERAGE \
DEF:minLoad={rrd1}:ChillManComp1:MIN \
DEF:maxLoad={rrd1}:ChillManComp1:MAX \
LINE2:load#ff0000:”ChillManComp1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillManComp2.name=ChillManComp2
report.chiller.ChillManComp2.columns=ChillManComp2
report.chiller.ChillManComp2.type=nodeSnmp
report.chiller.ChillManComp2.command=–title=”Kompressor 2″ \
–vertical-label=”ChillManComp2″ \
DEF:load={rrd1}:ChillManComp2:AVERAGE \
DEF:minLoad={rrd1}:ChillManComp2:MIN \
DEF:maxLoad={rrd1}:ChillManComp2:MAX \
LINE2:load#ff0000:”ChillManComp2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillManComp3.name=ChillManComp3
report.chiller.ChillManComp3.columns=ChillManComp3
report.chiller.ChillManComp3.type=nodeSnmp
report.chiller.ChillManComp3.command=–title=”Kompressor 3″ \
–vertical-label=”ChillManComp3″ \
DEF:load={rrd1}:ChillManComp3:AVERAGE \
DEF:minLoad={rrd1}:ChillManComp3:MIN \
DEF:maxLoad={rrd1}:ChillManComp3:MAX \
LINE2:load#ff0000:”ChillManComp3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillManComp4.name=ChillManComp4
report.chiller.ChillManComp4.columns=ChillManComp4
report.chiller.ChillManComp4.type=nodeSnmp
report.chiller.ChillManComp4.command=–title=”Kompressor 4″ \
–vertical-label=”ChillManComp4″ \
DEF:load={rrd1}:ChillManComp4:AVERAGE \
DEF:minLoad={rrd1}:ChillManComp4:MIN \
DEF:maxLoad={rrd1}:ChillManComp4:MAX \
LINE2:load#ff0000:”ChillManComp4″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillHourComp1.name=ChillHourComp1
report.chiller.ChillHourComp1.columns=ChillHourComp1
report.chiller.ChillHourComp1.type=nodeSnmp
report.chiller.ChillHourComp1.command=–title=”Laufzeit Kompressor 1″ \
–vertical-label=”in Stunden” \
DEF:load={rrd1}:ChillHourComp1:AVERAGE \
DEF:minLoad={rrd1}:ChillHourComp1:MIN \
DEF:maxLoad={rrd1}:ChillHourComp1:MAX \
LINE2:load#ff0000:”ChillHourComp1″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillHourComp2.name=ChillHourComp2
report.chiller.ChillHourComp2.columns=ChillHourComp2
report.chiller.ChillHourComp2.type=nodeSnmp
report.chiller.ChillHourComp2.command=–title=”Laufzeit Kompressor 2″ \
–vertical-label=”in Stunden” \
DEF:load={rrd1}:ChillHourComp2:AVERAGE \
DEF:minLoad={rrd1}:ChillHourComp2:MIN \
DEF:maxLoad={rrd1}:ChillHourComp2:MAX \
LINE2:load#ff0000:”ChillHourComp2″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillHourComp3.name=ChillHourComp3
report.chiller.ChillHourComp3.columns=ChillHourComp3
report.chiller.ChillHourComp3.type=nodeSnmp
report.chiller.ChillHourComp3.command=–title=”Laufzeit Kompressor 3″ \
–vertical-label=”in Stunden” \
DEF:load={rrd1}:ChillHourComp3:AVERAGE \
DEF:minLoad={rrd1}:ChillHourComp3:MIN \
DEF:maxLoad={rrd1}:ChillHourComp3:MAX \
LINE2:load#ff0000:”ChillHourComp3″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillHourComp4.name=ChillHourComp4
report.chiller.ChillHourComp4.columns=ChillHourComp4
report.chiller.ChillHourComp4.type=nodeSnmp
report.chiller.ChillHourComp4.command=–title=”Laufzeit Kompressor 4″ \
–vertical-label=”in Stunden” \
DEF:load={rrd1}:ChillHourComp4:AVERAGE \
DEF:minLoad={rrd1}:ChillHourComp4:MIN \
DEF:maxLoad={rrd1}:ChillHourComp4:MAX \
LINE2:load#ff0000:”ChillHourComp4″ \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”

report.chiller.ChillHourFC.name=ChillHourFC
report.chiller.ChillHourFC.columns=ChillHourFC
report.chiller.ChillHourFC.type=nodeSnmp
report.chiller.ChillHourFC.command=–title=”Freecooling Laufzeit” \
–vertical-label=”in Stunden” \
DEF:load={rrd1}:ChillHourFC:AVERAGE \
DEF:minLoad={rrd1}:ChillHourFC:MIN \
DEF:maxLoad={rrd1}:ChillHourFC:MAX \
LINE2:load#ff0000:”ChillHourFC” \
GPRINT:load:AVERAGE:” Avg \\: %8.2lf %s” \
GPRINT:load:MIN:”Min \\: %8.2lf %s” \
GPRINT:load:MAX:”Max \\: %8.2lf %s\\n”